The answer is No. However, if you are drilling hardened stainless, and quite a lot of holes that’s another story.
Tools you need for drilling stainless (304, 316)
A Good Quality M2 HSS drill bits, cutting oil and drill press or power drill is all you need, of course to deburr the edge, ideally to use countersunk drill, but pencil deburrer does the trick too.
So, what’s the secret here?
To start with a pilot hole just under half the final hole size
Allow enough lube to keep the drill bit cool
and use medium pressure as well as keeping the drill at a low speed
Can’t be bothered or don’t have all the required tooling? Why not let us to do it for you?
In our workshop, a quick turnaround time and affordable price, we can usually get it done in the same day and even cheaper than buying all the tools doing yourself!
https://boltin.com.au/wp-content/uploads/2022/05/thumbnail_image002.jpg6111280adminhttps://boltin.com.au/wp-content/uploads/2022/06/Bolt-in-300x86.pngadmin2022-05-24 04:41:272022-06-16 13:25:07Do you need a Cobalt Drill?
A regular workshop job
This is a regular workshop job we do for one of customers,
Cutting M12x3600mm threaded rod into 600mm length threaded rod, we cut precisely and clean the edge nicely
If you want specific length, we also cut them on the spot of the sale.
Hit us up if you have any custom jobs, we will help you out.
—————————————
Hi guys,
Today we have a motorbike double ended stud that requires a specific shank size(±0.05mm) with different thread on each end.
Job finished within an hour, and also got him a spare one for the rainy day.
Contact us for your own workshop job, and we will help you out with a quick turnaround time and affordable price.
Take care for now,
Bolt In
—————————————
Give us a call for your next project and let us help you out.
Do you need a Cobalt Drill?
The answer is No. However, if you are drilling hardened stainless, and quite a lot of holes that’s another story.
Tools you need for drilling stainless (304, 316)
A Good Quality M2 HSS drill bits, cutting oil and drill press or power drill is all you need, of course to deburr the edge, ideally to use countersunk drill, but pencil deburrer does the trick too.
So, what’s the secret here?
Can’t be bothered or don’t have all the required tooling? Why not let us to do it for you?
In our workshop, a quick turnaround time and affordable price, we can usually get it done in the same day and even cheaper than buying all the tools doing yourself!
Give us a call for your next project and let us help you out. In the meantime, stay Dry!
K0 Structural Bolts
K0 Structural bolts and nuts and washer kit available now! Don’t miss out – get in touch today!